Yes. Cover-meter or GPR scanning is standard before drilling through structural slabs and walls in Ajman — especially in post-tensioned buildings where hitting a tendon is unacceptable.
Ajman, UAE
Core Cutting Ajman
USF Demolition Works LLC delivers diamond core cutting across Ajman for MEP contractors, plumbers, electricians, and fit-out crews. We drill round holes from 25 mm up to 600 mm diameter through reinforced concrete slabs, walls, beams, and block walls — for ducts, pipes, cable trays, conduit, anchor bolts, and MEP penetrations.
CORE CUTTING IN AJMAN
Across Ajman we core-drill in live commercial buildings, malls, and residential towers without dust, vibration, or noise that affects the neighbour. Equipment is matched to the wall thickness, the rebar pattern, and the access space available. Ajman's demolition market is concentrated around villa replacement in Al Mowaihat and Al Rawda, plus a growing warehouse and light-industrial belt across Al Jurf and the Industrial Area. The smaller authority footprint generally means faster permit cycles than Dubai or Sharjah.
Regulatory framework: Demolition in Ajman is regulated by Ajman Municipality, the Ajman Planning Department, and Ajman Civil Defence, with FEWA handling electricity and water isolations. Free-zone projects in Ajman Free Zone (AFZ) follow the AFZ authority's separate NOC workflow before the municipality permit is closed.
WHY USF FOR CORE CUTTING IN AJMAN
Diameters from 25 mm to 600 mm — covering everything from electrical conduits to large MEP penetrations.
Owned diamond cores and drill rigs — no third-party hire markup or weekend availability surprise.
Wet cutting with continuous slurry collection — no impact vibration, no dust.
Night-shift and out-of-hours coordination with Ajman building managers and fit-out contractors.
Edge dressing and hole reinstatement supplied as an optional packaged scope.
OUR PROCESS
A structured 5-step approach from site survey to plot handover.
1
Mark-Up Confirmation
Hole positions confirmed against the MEP setting-out drawings in Ajman; rebar scanned where the spacing matters.
2
Rebar Scan & Adjustment
Cover-meter or GPR scan to locate rebar and post-tensioning tendons. Hole positions adjusted to avoid critical reinforcement.
3
Setup & Protection
Rig anchored, slurry pan or vacuum collection in place, and adjacent finishes / cables protected.
4
Drilling
Diamond core drilled wet to full depth; cores withdrawn and stockpiled for disposal or reuse.
5
Clean-Down & Handover
Hole edges cleaned, slurry removed, and the area handed back to the MEP contractor ready for the next stage.
CORE CUTTING COST FACTORS
Core cutting in Ajman is priced per hole (or per batch) after a site visit or against a marked-up MEP drawing. A minimum mobilisation charge typically applies for small jobs.
Diameter
Cost per hole rises with diameter — 50 mm cores are quick and cheap; 300 mm+ takes specialist rigs and longer setup.
Wall or slab thickness
Depth drives drill-time directly. Stitch-drilling through extra-thick walls adds setup cost.
Number of holes
Mobilisation is spread across the hole count; batches of 20+ holes price meaningfully better per hole than single-hole call-outs.
Rebar density
Heavily reinforced slabs blunt diamond segments faster and slow the drill.
Out-of-hours working
Night and weekend work in live commercial buildings carries a shift premium.
AREAS WE SERVE IN AJMAN
Al NuaimiyaAl RashidiyaAl MowaihatAl JurfAl HelioAl HamidiyaAl RawdaAl ZahraMushairefGarden CityAjman Industrial AreaNew Industrial Area
Structured Safety Procedures
115+ UAE Projects
ISO 9001 / 14001 / 45001
Owned Equipment Fleet
FAQs
Core Cutting Ajman — FAQs
Common questions about core cutting in Ajman — permits, costs, timelines, and process.
Explore more from USF Demolition Works LLC:
Get Started Today
READY TO START YOUR DEMOLITION PROJECT?
Request a site inspection and detailed quote. Our experts are ready to assist with all your demolition needs across Dubai and the UAE. Choose the best demolition company in UAE.