Track-mounted wall saws cut effectively up to 600 mm. Beyond that we switch to wire-sawing.
Dubai, UAE
Wall Sawing Dubai
Wall sawing is the cleanest way to create new door, window, and ventilation openings in existing concrete or block walls. USF Demolition Works LLC operates track-mounted diamond wall saws across Dubai for fit-out contractors, retail upgrades, and residential alterations — cutting up to 600 mm of reinforced concrete with vertical, horizontal, or angled cut lines.
WALL SAWING IN DUBAI
Each opening is preceded by GPR scanning, structural-engineer sign-off where required, and a slurry-control plan so the floor below stays clean. The cut section is removed mechanically or by crane, and the edges are dressed ready for finishing trades.
Regulatory framework: Structural wall openings (load-bearing walls, shear walls) require Dubai Municipality / DDA / Trakhees approval and consultant sign-off. Non-structural openings (partition walls) usually only need landlord NOC.
WHY USF FOR WALL SAWING IN DUBAI
Track-mounted wall saws — straight, true, repeatable cuts up to 600 mm.
GPR scanning and engineer sign-off as a packaged scope.
Slurry containment on occupied floors.
Quiet, dust-free operation suitable for live retail and offices.
Cut section removal and edge-dressing included.
OUR PROCESS
A structured 5-step approach from site survey to plot handover.
1
Site Visit & Mark-Up
We confirm the opening size on site, mark the cut lines, and check access for the saw track.
2
GPR Scan & Engineer Sign-Off
Rebar is mapped; structural openings receive consultant sign-off before the cut.
3
Track Installation
The saw track is fixed to the wall and the diamond blade is set to the slab thickness.
4
Cut & Slurry Control
The wall is cut wet with slurry collection. Cuts are straight, true, and ready for finishing.
5
Section Removal & Edge Dressing
The cut section is lowered or lifted out; edges are dressed and the opening is handed over clean.
WALL SAWING COST FACTORS
Wall sawing in Dubai is priced per linear metre of cut or as a fixed lump-sum per opening. Mobilization is typically 5–10 working days depending on engineer sign-off.
Wall thickness
Cost scales with depth — 600 mm is the typical limit before wire-sawing becomes the better option.
Opening size
Larger openings need more linear metres of cut and removal logistics.
Reinforcement
Heavy rebar or PT slows the cut; wire-saw may be substituted for very heavy reinforcement.
Access
High walls or tight rooms need scaffolds.
Slurry control
Occupied floors below need bunds and vacuum extraction.
AREAS WE SERVE IN DUBAI
Business BayDowntown DubaiDubai MarinaDIFCJLTTECOMAl QuozAl BarshaSheikh Zayed RoadDeiraBur DubaiJumeirah
Structured Safety Procedures
115+ UAE Projects
ISO 9001 / 14001 / 45001
Owned Equipment Fleet
FAQs
Wall Sawing Dubai — FAQs
Common questions about wall sawing in Dubai — permits, costs, timelines, and process.
Explore more from USF Demolition Works LLC:
Get Started Today
READY TO START YOUR DEMOLITION PROJECT?
Request a site inspection and detailed quote. Our experts are ready to assist with all your demolition needs across Dubai and the UAE. Choose the best demolition company in UAE.